Assays Up To 18.1 G/T Au, 2,380 G/T Ag, 16.55% Cu, 15.25% Pb, And 7.44% Zn In Rocks At K2 Gold's Cerro Gordo Target

Highlights

• High grade gold, silver, copper, lead and zinc returned across the entire mineralized trend. 105 samples collected - no samples returned below detection gold (See Table 1).

• This is a unique target area within the Mojave project where K2 holds rights to road-accessible patented claims within the core of the Cerro Gordo trend.

"The more we explore at Mojave, the more it continues to deliver remarkable results. The project is beginning to demonstrate the characteristics of a strongly mineralized polymetallic system of significant scale and multiple target areas.

As we have been focusing our efforts on permitting the Phase II drill program at the eastern (Newmont - Dragonfly) gold zones, we have yet to begin to explore the Cerro Gordo target area.

But, with momentum at our backs as we make significant progress on the permitting front, the decision was made to conduct the first significant work at Cerro Gordo.

Sampling over the 3km trend returned exceptional results with polymetallic mineralization found at all targets.

While high-grade vein and replacement mineralization was the focus of past explorers and miners (and is still a prime target today), we believe the potential for bulk tonnage, lower grade gold mineralization appears to have been overlooked," stated Anthony Margarit, President and CEO of K2 Gold.

Rock Sampling Results
The 2024 rock sampling program in the Cerro Gordo target area consisted of rock chip and grab sampling across the entire Cerro Gordo trend, verifying the location and mineralization associated with all known prospects and historic workings in the area. A total of 105 samples were collected, all samples returned above-detection results for gold.

Table 1 : Highlight 2024 rock samples from the Cerro Gordo target area.

Figure 1: Highlight 2024 rock samples from the Cerro Gordo target area - gold indicated.

To view an enhanced version of this graphic, please visit:

Cerro Gordo Target Area
The Cerro Gordo target area is within the northwest corner of the Mojave Project and includes multiple mineralized zones along a 750m wide x 3km long northwest-southeast trending corridor of polymetallic Au-Ag-Cu-Pb-Zn mineralization. Mineralization in the target area occurs adjacent to, and within, the Ignacio Stock, a quartz-monzonite intrusion emplaced into reactive limestone and siltstone units. Mineralization consists of predominantly northwest-trending high-grade quartz-sulphide veins, skarn and replacement bodies, and steeply plunging high grade breccia zones controlled by structural intersections. The 2024 sampling has revealed the Ignacio Stock itself to be mineralized, possibly representing a bulk tonnage target.

Sunset Mine
The Sunset mine was active in the late 1800's and is located in the northwest corner of the Cerro Gordo trend immediately above the Cerro Gordo Road. Mineralization consists of high-grade gold, silver, and copper within quartz-sulphide (tetrahedrite) veins and calc-silicate altered limestone. K2 conducted verification sampling of vein material within the mine workings and from mine dumps. Samples values returned from trace to highs of 13.3 g/t Au, 2,380 g/t Ag, 13.95% Cu, 3.37% Pb, and 3.51% Zn (multiple samples, see Table 1) . Individual veins trend northeast-southwest within a broader northwest-southeast alignment.

B Zone & Wheelbarrow Adit
The B Zone and Wheelbarrow Adit are found on the western margin of the Ignacio stock, approximately 500m southeast of the Sunset Mine. Mineralization consists of oxidized quartz-sulphide veining within calc-silicate altered limestone, with the Wheelbarrow Adit exposing a notable silicified breccia zone with high-grade with gold mineralization. The Wheelbarrow Adit was the focus of historic work on the property in 2009 with 1,091m of HQ diamond drilling completed in three holes, with a highlight result of 3.7 g/t Au over 38m in hole CG09DH-1 (1). K2's sampling at the Wheelbarrow Adit returned a composite grab sample of 18.1 g/t Au with 223 g/t Ag (G777537), and additional samples returning 13.3 g/t Au with 48.2 g/t Ag (G777638), and 12.8 g/t Au with 35.2 g/t Ag (G777639). A total of 6 samples were collected from the Wheelbarrow Adit area and returned 2.89 - 18.1 g/t Au; averaging 10.79 g/t Au

Approximately 160m southeast of the Wheelbarrow Adit, a grab sample of quartz veined and brecciated calc-silicate altered limestone from a historical prospect pit returned 11.05 g/t Au, 1,420 g/t Ag, 4.59 % Cu, 6.52% Pb, and 0.271% Zn (G777641), indicating metal zonation within the B Zone target.

Ignacio Silver Mine
The Ignacio Silver Mine comprises more than 1,200m of tunnel, a glory hole, and multiple smaller pits and trenches dating to the late 1800's and is located in the centre of the Cerro Gordo target area. Mineralization at Ignacio appears to have been controlled by the intersection of northwest-trending quartz veins and faulting visible at the present surface with northeast trending faulting, resulting in southeast plunging ore bunches. Underground workings are currently inaccessible due to caving, but sampling of quartz vein material from the Ignacio glory hole returned samples grading 5.77 g/t Au, 14.6 g/t Ag, and 4.48% Cu (G777753), and 1.395 g/t Au, 426 g/t Ag, 1.39% Cu, 2.14% Pb, and 1.105% Zn (G777752).

Ignacio Stock
The Ignacio Stock is exposed at surface as an approximately 650 by 240m quartz monzonite plug intruded into the limestone and shale host rocks in the project area. The stock is believed to be at least partially responsible for mineralization in the target area. At surface where exposed, the stock is oxidized and sericite altered, but visually muted relative to the surrounding skarn and vein mineralization. K2's sampling of the stock itself returned gold values of 1.93 g/t Au with >10,000 ppm As (G777562) and 1.36 g/t Au with 3,970 ppm As (G777562), demonstrating that the intrusion itself hosts gold mineralization. To K2's knowledge, no previous sampling or exploration work has targeted the Ignacio stock itself.

H Zone
The H Zone is located in the southeast portion of the target area along the eastern margin of the Ignacio stock. The target was historically evaluated by Asamera and Phelps-Dodge as a northwest-striking, gently southwest dipping, tabular body of gold skarn mineralization defined over 730m of strike length and to 120m depth. Structural controls on possible plunging high-grade mineralization as observed at the Wheelbarrow Adit were not historically examined.

Multiple ore dumps, waste piles, trenches, and workings were sampled by K2 during the 2024 program. Mineralization within the H Zone is polymetallic and varies from gold-silver +/- copper dominant (G777732: 9.09 g/t Au, 43.3 g/t Ag, 0.1115% Cu; G777530: 6.94 g/t Au, 38.6 g/t Ag, 2.72% Cu ) to silver-lead dominant (G777532: 0.2 g/t Au, 249 g/t Ag , 0.101% Cu, 15.25% Pb , 0.257% Zn, G777633: 0.187 g/t Au, 253 g/t Ag , 0.166% Cu, 11.25% Pb , 0.258% Zn), though the distribution is weakly constrained at present.

Morningstar Mine
The Morningstar Mine is found at the far southeastern end of the Cerro Gordo trend and was established in 1899 to exploit high-grade gold mineralization in the "Gold Stope" controlled by north-trending faults and fissures within northwest-trending, southwest dipping limestone. Sampling of gossan from the Gold Stope where it was mined to surface 130m northeast and uphill of the mine portal returned 5.68 g/t Au, 270 g/t Ag, 0.199% Cu, 0.613% Pb, and 0.252 Zn (G777761). Extremely high-grade silver mineralization was recovered from the mine, with samples collected by K2 from the ore dump returning up to 1,405 g/t Ag and 3.53% Cu. A grab sample from a historical excavator trench located 150m northwest of the portal returned high grade silver and copper mineralization (G777543: 1 .6 g/t Au, 1480 g/t Ag, 3.06% Cu ).

Figure 2: Map of the Mojave Property showing gold in rocks. 2024 samples indicated with white circles.

To view an enhanced version of this graphic, please visit:

About the Cerro Gordo Target Area
The Cerro Gordo target area consists of 59 unpatented lode claims and 5 patented claims situated in the northwest corner of the Mojave Project. A 750m wide, 3km long northwest-southeast trending zone of polymetallic mineralization trends northwest-southeast across the property from the Sunset-Copper Penny mines in the northwest to the Morningstar mine and Soda Ridge target in the southeast.

The target area has seen exploration and mining activity beginning in the mid-late 1800's and forms a portion of the Cerro Gordo mining district which produced an estimated 4.4 million ounces of silver, 37 tons of lead, and 12,000 tons of zinc with lesser amounts of gold and copper (2). Historical prospectors and miners invariably targeted extremely high-grade vein mineralization and massive sulphide replacement bodies at the Sunset-Copper Penny, Ignacio, Morningstar, and the adjacent Cerro Gordo mines.

Modern exploration on the property began in the 1960's and was performed by multiple operators including Asamera Minerals, Coeur Exploration, and Phelps Dodge among others. The work to date has included various geological, geochemical, and geophysical surveys, over 15,000m of drilling, preliminary metallurgical test work, and historical gold resource estimates, all of which examined the potential for tabular, bulk tonnage deposits while ignoring the existing potential for structurally controlled, plunging high-grade mineralization.

Initial evaluation by K2 indicates that the Cerro Gordo target area is highly prospective for previously unrecognized structurally controlled and intrusive-hosted mineralization.

(1) R. Wetzel, 2009
(2) Merriam, 1963, Geology of the Cerro Gordo Mining District, Inyo County, California

Qualified Person ("QP")
The technical information in this news release has been prepared in accordance with Canadian regulatory requirements set out in NI 43-101 and reviewed and approved by Eric Buitenhuis, M.Sc., P.Geo., K2's QP and Vice President of Exploration.

The analytical work for the rock sampling programs was performed by ALS Laboratories ("ALS") in Reno, Nevada and North Vancouver, British Columbia. Samples were submitted to ALS's Reno, Nevada facility where they were prepared using procedure PREP-31 (crush, split, and pulverize 250g to better than 85% passing 75 microns). Pulp samples were then analysed for gold by method Au-AA23, a 30-gram Fire Assay fusion with an atomic absorption finish (AAS). A 0.5g pulp was analysed by aqua-regia acid digestion and inductively coupled plasma-atomic emission spectrometry (ICP-AES) for 36 elements using method ME-ICP41. Samples containing >10 g/t Au were analyzed by Au-GRA21, a 30-gram Fire Assay fusion with gravimetric finish. Samples containing overlimit silver, copper, lead, or zinc were analyzed by methods Ag-OG62, Cu-OG62, Pb-OG62, and Zn-OG62, which are aqua regia digests with ore grade ICP finishes.

About K2 Gold
K2 is a proud member of Discovery Group and currently has three projects in Southwest USA and the Yukon.

The Si2 Gold Project is located in Esmeralda County, approximately 60km northwest of Tonopah, Nevada, and 20km northwest of Allegiant Gold's Eastside deposit (1.4Moz Au, 8.8 Moz Ag). The project is road accessible and consists of 118 BLM lode claims covering 986 Ha, 65 of which are under option from Orogen Royalties Inc. (TSXV: OGN). The claims cover an 8 km2 area of steam heated alunite-kaolinite-buddingtonite alteration within a sequence of felsic to intermediate volcanic rocks displaying brecciation and strongly anomalous mercury.

K2's 2023 diamond drill program at the Si2 Project confirmed that the system is gold bearing. The project was initially identified using the same methods, and by the same exploration team that identified AngloGold Ashanti's 4.22 Moz Au Silicon project1 near Beatty, Nevada, and was staked based on its strong geological similarities to Silicon.