(MENAFN- ACCESSWIRE)
TORONTO, ON / ACCESSWIRE / May 2, 2022 / Gratomic Inc. ('Gratomic', 'GRAT,' or the 'Company') (TSX-V:GRAT)(OTCQX:CBULF)(FSE:CB82) announces that 1,734.30 m of the 5,000-meter drilling campaign on its Capim Grosso graphite project has been completed. 15 diamond drillholes were completed to date, with two additional holes in progress. The project is located in the Bahia State of Brazil, with the Company holding a 100% controlling interest in the property.
The drilling has been expedited by the introduction of a second drilling rig, which has been onsite since February of 2022 as per this press release dated February 23, 2022.
Table 1: Drillholes completed to date on the Capim Grosso Project in Brazil (WGS84 UTM 24S)
NAME | X | Y | Z | AZIMUTH | DIP | EOH |
CGD001 | 391942 | 8749876 | 381 | 45 | -58 | 100.10 |
CGD002 | 391867 | 8749905 | 382 | 50 | -60 | 141.20 |
CGD003 | 391926 | 8749863 | 381 | 50 | -60 | 120.55 |
CGD004 | 391842 | 8749975 | 381 | 50 | -60 | 93.15 |
CGD005 | 391775 | 8750076 | 378 | 50 | -60 | 111.00 |
CGD006 | 391722 | 8750171 | 378 | 50 | -60 | 120.65 |
CGD007 | 391626 | 8750343 | 375 | 50 | -60 | 120.20 |
CGD008 | 391755 | 8750196 | 376 | 50 | -60 | 100.05 |
CGD009 | 391603 | 8750328 | 376 | 50 | -60 | 120.00 |
CGD010 | 391597 | 8750372 | 375 | 50 | -60 | 141.00 |
CGD011 | 391574 | 8750352 | 376 | 50 | -60 | 140.05 |
CGD012 | 391533 | 8750454 | 373 | 50 | -60 | 134.65 |
CGD013 | 391431 | 8750595 | 373 | 50 | -60 | 140.70 |
CGD014 | 391392 | 8750562 | 376 | 50 | -60 | 151.00 |
CGD015 | 391336 | 8750756 | 371 | 50 | -60 | 206.90 |
The first batch of its drillhole assays from the Capim Grosso Project has been received from SGS Geosol in Brazil which included the following:
75 assays, which includes three internal Certified Reference Materials
Table 2: Table 2 highlights intervals from the first 8 drill holes on the Capim Grosso Project in Brazil (1 % TGC cut-off grade and 3 % minimum TGC grade used). More detailed information of the assay results from the 8 holes is set out in Table 4 below. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 97 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.
DH_Hole | DH_From (m) | DH_To (m) | Length (m) | Total Graphitic Carbon (TGC) (%) |
CGD001 | 20.74 | 31.90 | 11.16 | 13.13 |
37.37 | 38.55 | 1.18 | 10.11 |
39.60 | 40.47 | 0.87 | 3.33 |
40.84 | 41.32 | 0.48 | 3.08 |
CGD002 | 114.35 | 114.45 | 0.10 | 5.92 |
130.25 | 130.69 | 0.44 | 8.42 |
CGD003 | 71.93 | 73.53 | 1.60 | 6.72 |
74.80 | 75.40 | 0.60 | 8.24 |
79.85 | 81.83 | 1.98 | 3.21 |
CGD004 | 26.26 | 27.45 | 1.19 | 3.11 |
63.95 | 65.01 | 1.06 | 3.76 |
CGD005 | 38.07 | 38.64 | 0.57 | 13.54 |
40.00 | 41.58 | 1.58 | 11.13 |
47.23 | 48.65 | 1.42 | 8.56 |
79.24 | 79.56 | 0.32 | 9.13 |
CGD006 | 67.60 | 69.35 | 1.75 | 3.47 |
72.55 | 73.38 | 0.83 | 3.91 |
77.23 | 81.11 | 3.88 | 7.41 |
CGD007 | 16.40 | 17.76 | 1.36 | 3.84 |
23.25 | 24.70 | 1.45 | 10.89 |
50.25 | 56.25 | 6.00 | 3.95 |
56.80 | 58.68 | 1.88 | 5.41 |
64.98 | 65.91 | 0.93 | 6.13 |
91.40 | 92.70 | 1.30 | 3.54 |
CGD008 | 6.20 | 16.05 | 9.85 | 5.00 |
16.55 | 18.55 | 2.00 | 3.50 |
SGS Geosol's graphitic carbon assay methods and equipment include the LECO carbon-sulphur analyzer and high temperature combustion infrared detection. During this procedure, the carbon in the sample is converted to carbon dioxide CO2, which is then measured by infrared (IR) detectors.
Once the drilling is complete and all drillholes are assayed, the Company intends to process the obtained data in order to generate a Maiden Mineral Resource Estimate in accordance with the requirements of National Instrument 43-101 - Standards of Disclosure for Mineral Projects (' NI 43-101 ') for the Capim Grosso asset, which will be combined with pilot metallurgical testing data and other relevant information in order to generate a Feasibility Study (FS) and fast track the project development.
The tables below present all Total Graphitic Carbon (TGC) (%) assay results obtained so far from the Capim Grosso Property
Table 3: Graphitic carbon assays from the 42 trenches completed on the Capim Grosso Project in Brazil (14 trenches did not intersect graphite). Trenches were sampled according to visual grade estimation in two meter increments in horizontal continuous sections on the pit walls. Where visual grade was regarded as continuous, sampling was completed up to a maximum of 6 m increments. No internal QA/QC was performed by Gratomic, but SGS inserted their own CRMs, which assayed within 90 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. While the trenches were excavated as close to perpendicular on strike of local litholgies, the dip of each trench cannot be perpendicular on a lithological dip.
TRENCH # | FROM (m) | TO (m) | INTERVAL (m) | SAMPLE # | TGC (%) |
CGT001 | 20 | 22 | 2 | X6201 | 21.65 |
26 | 28 | 2 | X6202 | 19.14 |
CGT002 | 8 | 10 | 2 | X6203 | 27.3 |
16 | 18 | 2 | X6204 | 20.37 |
23 | 24 | 1 | X6206 | 41.79 |
27 | 28 | 1 | X6207 | 7.94 |
CGT004 | 14 | 15 | 1 | X6209 | 16.2 |
30 | 31 | 1 | X6210 | 3.89 |
CGT005 | 35 | 36 | 1 | X6213 | 11.39 |
CGT006 | 15 | 16 | 1 | X6215 | 0.57 |
16 | 18 | 2 | X6216 | 4.58 |
18 | 20 | 2 | X6217 | 8.34 |
20 | 22 | 2 | X6218 | 14.04 |
32 | 34 | 2 | X6222 | 11.74 |
34 | 36 | 2 | X6223 | 9.32 |
36 | 38 | 2 | X6224 | <0,05 |
16 | 22 | 6 | X6225 | 8.45 |
32 | 36 | 4 | X6226 | 6.4 |
CGT007 | 0 | 2 | 2 | X6227 | 6.66 |
2 | 4 | 2 | X6228 | 13.33 |
4 | 6 | 2 | X6229 | 25.04 |
14 | 16 | 2 | X6230 | 7.47 |
16 | 18 | 2 | X6231 | 11.18 |
18 | 20 | 2 | X6232 | 7.6 |
20 | 22 | 2 | X6233 | 9.62 |
CGT008 | 23 | 24 | 1 | X6234 | 15.45 |
CGT009 | 3 | 5 | 2 | X6235 | 14.29 |
18 | 20 | 2 | X6238 | 9.13 |
CGT010 | 20 | 22 | 2 | X6239 | 5.57 |
22 | 24 | 2 | X6240 | 7.11 |
CGT011 | 4 | 6 | 2 | X6243 | 17.15 |
33 | 34 | 1 | X6244 | 18.57 |
47 | 49 | 2 | X6245 | 14.27 |
CGT012 | 38 | 40 | 2 | X6247 | 15.64 |
40 | 42 | 2 | X6248 | 14.27 |
49 | 50 | 1 | X6249 | 25.08 |
57 | 59 | 2 | X6251 | 19.91 |
CGT015 | 10 | 12 | 2 | X6252 | 32.63 |
12 | 14 | 2 | X6253 | 31.89 |
18 | 19 | 1 | X6255 | 12.39 |
CGT018 | 12 | 14 | 2 | X6258 | 12.39 |
14 | 16 | 2 | X6259 | 16.39 |
16 | 18 | 2 | X6260 | 19.43 |
CGT019 | 19 | 21 | 2 | X6261 | 29.95 |
CGT021 | 15.37 | 16.57 | 1.2 | 89681 | 7.02 |
CGT022 | 17.2 | 18.4 | 1.2 | 89682 | 11.38 |
CGT023 | 2.1 | 3.5 | 1.4 | 89683 | 2.16 |
CGT027 | 49 | 51.2 | 2.2 | 89688 | 7.45 |
79.4 | 81.4 | 2 | 89687 | 13.46 |
81.4 | 82.9 | 1.5 | 89686 | 6.14 |
85.9 | 87.9 | 2 | 89685 | 3.29 |
87.9 | 88.9 | 1 | 89684 | 14.22 |
CGT029 | 91.7 | 93.7 | 2 | 89689 | 30.12 |
93.7 | 95 | 1.3 | 89690 | 25.91 |
97.55 | 98.55 | 1 | 89691 | 6.03 |
114.55 | 116.55 | 2 | 89692 | 32.89 |
116.55 | 118.95 | 2.4 | 89693 | 3.78 |
CGT030 | 25.2 | 31.9 | 6.7 | 89694 | 5.68 |
CGT031 | 26.5 | 28.5 | 2 | 89695 | 18.57 |
CGT032 | 40.05 | 42.05 | 2 | 89696 | 2.93 |
42.05 | 44.05 | 2 | 89697 | 3.53 |
44.05 | 46.05 | 2 | 89698 | 3.77 |
46.05 | 48.05 | 2 | 89699 | 2.23 |
48.05 | 48.9 | 0.85 | 89700 | 1.63 |
58.1 | 59.1 | 1 | 89608 | 2.24 |
67.8 | 68.7 | 0.9 | 89609 | 2.61 |
82.5 | 84.5 | 2 | 89610 | 5.89 |
84.5 | 85.6 | 1.1 | 89611 | 2.38 |
CGT033 | 26 | 26.8 | 0.8 | 89612 | 4.01 |
28.75 | 30.75 | 2 | 89613 | 2.96 |
30.75 | 32.75 | 2 | 89614 | 3.25 |
32.75 | 34.75 | 2 | 89615 | 4.55 |
34.75 | 36.45 | 1.7 | 89616 | 8.51 |
50.15 | 52.15 | 2 | 89617 | 1.53 |
52.15 | 54.15 | 2 | 89618 | 1.78 |
54.15 | 56.5 | 2.35 | 89619 | 1.76 |
74.6 | 75.9 | 1.3 | 89620 | 4.77 |
CGT034 | 16.55 | 17.95 | 1.4 | 89621 | 10.32 |
CGT035 | 19.4 | 19.8 | 0.4 | 89622 | 2.82 |
30.3 | 30.8 | 0.5 | 89623 | 3.25 |
31.6 | 32.1 | 0.5 | 89624 | 2.48 |
34.2 | 36.2 | 2 | 89625 | 7.41 |
37.85 | 40 | 2 | 89626 | 8.35 |
39.85 | 41.85 | 2 | 89627 | 22.61 |
41.85 | 43.85 | 2 | 89628 | 2.3 |
43.85 | 45.85 | 2 | 89629 | 2.13 |
45.85 | 47.85 | 2 | 89630 | 8.76 |
47.85 | 49.05 | 1.2 | 89631 | 7.81 |
56.8 | 57.4 | 0.6 | 89632 | 6.8 |
CGT036 | 40.05 | 41.2 | 1.15 | 89633 | 1.4 |
46.4 | 47 | 0.6 | 89634 | 6.95 |
52.8 | 54.8 | 2 | 89635 | 6.72 |
67.8 | 69.8 | 2 | 89636 | 9.9 |
69.8 | 71.6 | 1.8 | 89637 | 4.24 |
73.1 | 75.1 | 2 | 89638 | 3.43 |
75.1 | 77.1 | 2 | 89639 | 5.65 |
77.1 | 79.5 | 2.4 | 89640 | 2.92 |
87.9 | 89.2 | 1.3 | 89641 | 9.78 |
CGT040 | 41.3 | 43.3 | 2 | 89642 | 13.63 |
43.3 | 44.6 | 1.3 | 89643 | 10.5 |
CGT042 | 22.6 | 24.6 | 2 | 89644 | 9.65 |
24.6 | 27 | 2.4 | 89645 | 19.73 |
Table 4: Graphitic carbon assays from 8 of the 15 drillholes completed to date on the Capim Grosso Project in Brazil (all drillholes to date have intersected graphite). Drillcore was halved and samples taken according to visual grade estimation in one meter increments. Where visual grade was regarded as continuous, sampling was completed up to a maximum of 2 m increments. Internal QA/QC was performed by Gratomic inserting a Certified Reference Material (CRM) every 20 samples, (OREAS 725) which assayed within 97 % of the expected graphitic carbon value of the CRM. The QP therefore accepts the values of the laboratory assays. The intervals are regarded as true width (or as close as possible to) due to the dip of drillholes being perpendicular on measured dip of geology.
HOLE | FROM (m) | TO (m) | INTERVAL (m) | SAMPLE # | TGC (%) |
CGD001 | 14.45 | 15.9 | 1.45 | X6701 | 2.55 |
20.74 | 21.7 | 0.96 | X6702 | 3.68 |
21.7 | 22.7 | 1 | X6703 | 11.58 |
22.7 | 23.7 | 1 | X6704 | 7.23 |
23.7 | 24.9 | 1.2 | X6705 | 26 |
24.9 | 25.8 | 0.9 | X6706 | 21.76 |
25.8 | 27.05 | 1.25 | X6707 | 17.65 |
27.05 | 28.65 | 1.6 | X6708 | 23.61 |
28.65 | 29.65 | 1 | X6709 | 3.28 |
29.65 | 30.65 | 1 | X6710 | 4.33 |
30.65 | 31.9 | 1.25 | X6711 | 4.8 |
37.37 | 38.55 | 1.18 | X6712 | 10.11 |
39.6 | 40.47 | 0.87 | X6713 | 3.33 |
40.84 | 41.32 | 0.48 | X6714 | 3.08 |
CGD002 | 113.76 | 113.86 | 0.1 | X6716 | 4.5 |
114.35 | 114.45 | 0.1 | X6717 | 5.92 |
130.25 | 130.69 | 0.44 | X6719 | 8.42 |
CGD003 | 71.93 | 72.33 | 0.4 | X6719 | 4.41 |
72.33 | 73.53 | 1.2 | X6720 | 7.49 |
74.8 | 75.4 | 0.6 | X6721 | 8.24 |
79.85 | 80.2 | 0.35 | X6722 | 8.86 |
80.2 | 81.83 | 1.63 | X6723 | 2 |
CGD004 | 26.26 | 27.45 | 1.19 | X6724 | 3.11 |
59.24 | 59.43 | 0.19 | X6725 | 2.66 |
62.77 | 62.82 | 0.05 | X6726 | 37.9 |
63.95 | 64.15 | 0.2 | X6727 | 2.66 |
64.15 | 65.01 | 0.86 | X6728 | 4.02 |
CGD005 | 38.07 | 38.64 | 0.57 | X6729 | 13.54 |
38.64 | 39.64 | 1 | X6730 | 0.38 |
39.64 | 40 | 0.36 | X6731 | 0.16 |
40 | 40.98 | 0.98 | X6732 | 4.37 |
40.98 | 41.58 | 0.6 | X6733 | 22.16 |
47.23 | 47.53 | 0.3 | X6734 | 2.61 |
47.53 | 48.65 | 1.12 | X6735 | 10.15 |
49.62 | 50.95 | 1.33 | X6736 | 1.05 |
79.24 | 79.56 | 0.32 | X6738 | 9.13 |
CGD006 | 67.6 | 69.35 | 1.75 | X6739 | 3.47 |
70.45 | 70.8 | 0.35 | X6740 | 0.45 |
72.55 | 73.38 | 0.83 | X6741 | 3.91 |
73.38 | 75.39 | 2.01 | X6742 | 0.69 |
77.23 | 78.23 | 1 | X6743 | 3.62 |
78.23 | 78.75 | 0.52 | X6744 | 6.42 |
78.75 | 79.95 | 1.2 | X6745 | 6.99 |
79.95 | 81.11 | 1.16 | X6746 | 11.56 |
CGD007 | 16.4 | 17.76 | 1.36 | X6747 | 3.84 |
23.25 | 24.7 | 1.45 | X6748 | 10.89 |
45.07 | 45.37 | 0.3 | X6749 | 1.94 |
50.25 | 51.25 | 1 | X6750 | 3.94 |
51.25 | 52.25 | 1 | X6751 | 3.78 |
52.25 | 53.25 | 1 | X6752 | 4.08 |
53.25 | 54.25 | 1 | X6753 | 5.09 |
54.25 | 55.25 | 1 | X6754 | 4.34 |
55.25 | 56.25 | 1 | X6755 | 2.47 |
56.25 | 56.8 | 0.55 | X6756 | 0.15 |
56.8 | 58.05 | 1.25 | X6758 | 5.2 |
58.05 | 58.68 | 0.63 | X6759 | 5.83 |
64.98 | 65.91 | 0.93 | X6760 | 6.13 |
91.4 | 92.7 | 1.3 | X6761 | 3.54 |
CGD008 | 6.2 | 7.2 | 1 | X6762 | 4.33 |
7.2 | 8.2 | 1 | X6763 | 1.62 |
8.2 | 9.2 | 1 | X6764 | 3.66 |
9.2 | 10.2 | 1 | X6765 | 7.59 |
10.2 | 11.2 | 1 | X6766 | 8.61 |
11.2 | 12.2 | 1 | X6767 | 10.77 |
12.2 | 13.2 | 1 | X6768 | 2.9 |
13.2 | 14.2 | 1 | X6769 | 2.85 |
14.2 | 15.2 | 1 | X6770 | 2.47 |
15.2 | 16.05 | 0.85 | X6771 | 5.22 |
16.55 | 18.55 | 2 | X6772 | 3.5 |
20.55 | 21.75 | 1.2 | X6773 | 2.16 |
21.75 | 22.75 | 1 | X6774 | 0.89 |
29.35 | 29.95 | 0.6 | X6775 | 1.3 |
Qualified Persons
Nico Scholtz is a consulting geologist and has reviewed and approved the scientific and technical information in this news release. Mr. Scholtz is a registered Professional Natural Scientist with the South African Council for Natural Scientific Professions (Pr. Sci. Nat. No. 400299/07). Mr. Scholtz is the Company's 'Qualified Person' as defined by NI 43-101.
About Gratomic
Gratomic is a multinational company with projects in Namibia, Brazil, and Canada. The Company is focused on becoming a leading global graphite supplier and aims to secure a strong position in the EV (Electric Vehicle) battery supply chain. With the continued development of its flagship Aukam project and further exploration on the Company's Capim Grosso property, Gratomic sets itself apart by seeking out unique top-quality assets around the world. True to its roots, the Company will continue to explore graphite opportunities displaying potential for development. The Company ranked third place in the top 10 preforming mining stocks on the 2022 TSX Venture 50™.
Large quantities of high-quality vein graphite have been shipped for testing to confirm its viability as an anode material. Gratomic is confident that the test results will provide a unique competitive advantage in its desired target markets. The Company will continue to update the public on the status of these tests and will provide results as soon as they become available.
The Company has formed a collaboration agreement with Forge Nano. With its patented ALD (Atomic Layer Deposition) coating, this cooperation with Forge Nano is a key element to support Gratomic's strategies towards the value-added phases of production of graphite for anode applications, namely micronization, spheronization and coating, making Gratomic graphite a preferred choice for use in lithium-ion batteries.
For more information: visit the website at or contact:
Arno Brand at or (416) 561- 4095
Subscribe at gratomic.ca/contact/ to be added to our email list.
For Marketing and Media information, please email:
'Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.'
Forward Looking Statements:
This news release contains forward-looking statements, which relate to future events or future performance and reflect management's current expectations and assumptions. Such forward-looking statements reflect management's current beliefs and are based on assumptions made by and information currently available to the Company. Investors are cautioned that these forward-looking statements are neither promises nor guarantees and are subject to risks and uncertainties that may cause future results to differ materially from those expected. These forward-looking statements are made as of the date hereof and, except as required under applicable securities legislation, the Company does not assume any obligation to update or revise them to reflect new events or circumstances. All of the forward-looking statements made in this press release are qualified by these cautionary statements and by those made in our filings with SEDAR in Canada (available at )
SOURCE: Gratomic Inc.
View source version on accesswire.com:
MENAFN02052022004220003708ID1104144025
Legal Disclaimer:
MENAFN provides the information “as is” without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the provider above.