(MENAFN- GlobeNewsWire - Nasdaq) New York, Aug. 25, 2023 (GLOBE NEWSWIRE) -- Reportlinkerannounces the release of the report "In-vehicle Communication and Network Interface Chip Industry Report, 2023" -
In-vehicle communication chip research: automotive Etheis evolving towards high bandwidth and multiple ports, and the related chip market is growing rapidly.
By communication connection form, automotive communication falls into wireless communication and wired communication.
An automotive electronic and electrical system uses a communication network as the carrier to connect electronic devices in a vehicle through wiring harnesses. As automotive E/E architecture evolves and in-vehicle functions become more complex, the increasing number of sensors in a vehicle leads to a surge in vehicle data. This requires very high vehicle real-time communication and data processing capabilities. The automotive Ethewith high bandwidth, low delay and high reliability therefore will be more suitable for the long-term evolution of future E/E architecture and the high-speed in-vehicle communication.
In the zonal architecture, the centralization of functions allows vehicles to pack far fewer ECUs. At this time, the central computing platform requires extremely high computing power of controllers, but relatively low computing power of zone controllers. To meet vehicle functional safety requirements, automotive Ethewill become the data backbone link in the zonal architecture for the massive data transmission and migration between central and zone controllers, and the interaction between software and algorithms.
When Etheis used as the backbone network for future vehicles, the information interaction between zone controllers is enabled via Etheswitches. At present, vehicle network communication chip vendors like Marvell, Broaand NXP have proposed the next-generation network architecture.
For example, Aquantia (acquired by Marvell) predicts that the vehicle network architecture for future ADAS will have two central computing units (GPU/CPU), and connect all cameras and sensors via three switches, and Ethewill be adopted for the entire vehicle connection. Each sensor needs to carry a PHY chip, and each switch node also needs to be configured with several PHY chips to input the data transmitted from sensors. Automotive Etheinvolves redundant backup design where hardware functions have a backup or are processed in parallel. Data from cameras and sensors are sent to a central computing unit, while the other central computing unit functions as a backup and take control of the vehicle in case that the former one fails.
Automotive Etheis evolving towards high bandwidth and multiple ports.
Automotive Ethechips are led by physical layer (PHY) interface chip and Etheswitch chip. PHY chips convert digital/analog signals based on the physical layer, and do not process data. Based on the data link layer, switch chips process transmitted data, covering fast forwarding and switching, filtering and classification of data packets.
With the evolution of automotive E/E architecture, automotive Ethechips boast an increasing penetration. China's automotive Ethechip market booms. For instance, automotive EthePHY chips are largely used in central computing systems, ADAS and IVI systems. According to the average number of PHY chips per vehicle and the average price of PHY chips, China's passenger car EthePHY chip market is estimated to be worth RMB5.8 billion in 2022. In the future, as automotive Ethepenetrates into other vehicle fields, a single vehicle will use more chips, and high-speed PHY chips take a rising share, which will offset the decline in the price of a single chip model. It is conceivable that China's passenger car EthePHY chip market will be valued at RMB21.87 billion in 2025.
The evolution direction and speed of automotive E/E architecture have an impact on the development direction and speed of future automotive Ethernet. To meet the data transmission requirements (e.g., multi-functional interaction) in intelligent cockpits, automotive Ethewill head in the direction of high bandwidth and multi-port configurations in the future.
Autonomdriving promotes the development of 10G+ automotive Ethernet.
As autonomdriving technology matures, vehicles have ever higher requirements for real-time performance and sensibility of massive data transmission. In addition, the use of autonomdriving on roads will trigger demand for massive data storage, and the real-time storage of high-definition data from sensors such as cameras and LiDAR requires higher in-vehicle network bandwidth.
The higher the level of autonomdriving, the greater the demand for high-speed vehicle communication network. To meet the requirements of L3 and higher-level autonomdriving, 2.5/5/10G automotive Ethewill be largely introduced into in-vehicle networks. L4/L5 autonomvehicles will depend more heavily on automotive Ethernet, and many of them will introduce the 10G+ standard. Therefore, high-speed automotive Etheis essential for L3+ autonomdriving.
Most mainstream or emerging automakers have laid out "centralized" E/E architecture in advance, and will apply it in production models during 2023-2025. 10G bandwidth is a must in realization of zonal architecture in 2025. In the 10G automotive Ethechip market, only Marvell and Broacan provide 10G+ Etheswitches.
In June 2023, Marvell announced the Brightlane Q622x family of central Automotive Etheswitches to support the zonal networking architectures of next-generation vehicles. Zonal switches aggregate traffic from devices located within a physical zone of a car like processors, sensors, actuators and storage systems, and is connected to the central computing switch via high-speed Ethefor information exchange.
Brightlane Q622x switches are single-chip devices, including Q6222 and Q6223:
Brightlane Q6223 delivers 90 Gbps of bandwidth, nearly 2x the capacity of currently available automotive switches. The non-blocking 12-port design can be configured from among the eight integrated 10G SerDes ports, four integrated 2.5G SerDes ports, and two integrated 1000Base-T1 PHYs available.
Brightlane Q6222 contains nine ports for 60 Gbps, with five integrated 10G SerDes ports, four integrated 2.5G SerDes ports, and two integrated 1000Base-T1 PHYs available for selection.
The number of automotive Etheports increases with the evolution of automotive E/E architecture
As automotive E/E architecture evolves, the penetration of automotive Etheis on the rise, and the demand for Ethenode chips will also jump in the future, with over 100 Etheports per intelligent vehicle.
So far, production vehicle do not have many Etheports, which are often used in subsystems such as IVI, in-vehicle communication, gateway, and domain controller. A vehicle network architecture with Etheas the backbone has yet to be built. In the future, with the production of models based on zonal architecture, automotive Ethewill be used much more widely in vehicle network communication architecture, and by then the number of automotive Ethecommunication ports will swell accordingly.
The new products or updated/iterative products released by chip vendors such as Broaand NXP tend to have increasing communication ports.
In May 2022, Broaannounced BCM8958X, a high bandwidth monolithic automotive Etheswitch device that features 16 Etheports of which up to six are 10 Gbps capable (XFI or PCIe x1 4.0 with SRIOV), as well as integrated 1000BASE-T1 and 100BASE-T1 PHYs.
Read the full report:
About reportlinker
ReportLinker is an award-winning market research solution. Reportlinker finds and organizes the latest industry data so you get all the market research you need - instantly, in one place.
__________________________

MENAFN25082023004107003653ID1106949912