(MENAFN- GetNews) FC479 Roving Machine for long and short staple fiber is our company in response to the diversified needs of customers spinning, in the traditional cotton spinning, wool spinning roving frame technology on the basis of research and production, the industry's first long and short fiber general roving frame, suitable for spinning fiber length range of 30-102mm, the machine uses high precision servo control and other high-tech, to achieve the roving frame electronic drafting, Five servo motors are used to directly drive the five systems of ingot wing. one-two roller, three-four roller, bobbin and rib lifting, and the main mechanical transmission system is driven by circular toothed synchronous belt, which realizes the synchronous operation of five motors under the control and coordination of the main controller.

The twist and other process requirements can be completed conveniently and efficiently by inputting parameters through the human-machine interface. Electronic drawing-in can be adjusted directly through the human-machine interface. Special yarns such as belly yarn can be spun. It has a power failure protection device and a constant tension spinning system, which can greatly improve the quality of the yarn. It has an industrial control system database that can store mature spinning processes for different varieties and counts, making it convenient and quick to adjust processes and change varieties.

The car head transmission and layout have been optimized, with a simple and good-ventilated car head layout that is easy to install and maintain. The drawing-in structure has been redesigned, making it suitable for a wider range of fibers, with the suitable fiber length reaching 30-102mm. The wiring is done using a bridge truss distribution system, making electrical installation convenient and reducing electrical signal interference. The main drive uses a synchronous belt drive, providing smooth transmission, low noise, and high efficiency. The system can be restored to its original state with one key, allowing the control system software parameters to be restored to their original state when they are damaged.

MENAFN10112025003238003268ID1110319713