Old Cooler Not Cooling? 5 Simple Tricks To Make It Work Like Brand New Again

(MENAFN- AsiaNet News) Is your old air cooler not working properly this summer? This article gives you easy tips like cleaning the cooler, changing the cooling pads, and fixing the motor. Use these tricks to make your old cooler feel brand new again.Summer has started, and every house needs a cooler. Everyone is probably pulling out their old coolers now. But is your cooler looking old after just a few months? Are you thinking of buying a new one? Wait a bit, because the tips in this article will help make your old cooler work just like a new one.Sometimes, dirt collected in the cooler can make it look old and work poorly. You need to clean it properly. For this, completely empty the cooler and clean it. Use a brush or cloth to remove any dirt from the tank, and then wash it with clean water.If your cooler has cooling pads, you must change them. The cooler's cooling power mostly depends on these pads. If the pads are too old or full of dust, the air simply won't get cool.Is the airflow from the cooler weak, or is it making a lot of noise? The motor or the fan could be the reason. Clean the fan blades properly and put a little oil in the motor. This will help the motor run smoothly and improve the cooler's performance.You should check the cooler's water pump. If the pipe has dirt or a blockage, water won't reach the pads, which means no cooling. So, don't forget to clean the pipe and the pump. If needed, you can also replace the pump.

To fix a leaky tank, you can apply clay to the cracks. This will stop the water from leaking. To make it even stronger, you can also paint over it. Add a little alum or some neem oil to the water in the tank. This will stop any bad smells from coming.

Always place your cooler in the right spot. Keep it near a window or in an open space to pull in fresh air. If you keep the cooler in a closed room, its cooling ability will reduce.

MENAFN17032026007385015968ID1110871029