Dundee Reports That Shovelnose Continues To Deliver High-Grade Results As Resource Drilling Nears Completion And Pre-Feasibility Work Accelerates
| Selected assay highlights include: | |
| SNR26-108: | 37.89m grading 5.29 g/t Au & 32 g/t Ag from 183.11m downhole |
| SNR26-116: | 32.06m grading 5.05 g/t Au & 28 g/t Ag from 223.00m downhole |
| SNR26-120: | 30.00m grading 2.34 g/t Au & 16 g/t Ag from 210.50m downhole |
| SNR26-124: | 7.45m grading 4.99 g/t Au & 81 g/t Ag from 215.85m downhole; and |
| 14.94m grading 2.61 g/t Au & 16 g/t Ag from 227.52m downhole | |
| SNR26-129: | 14.00m grading 13.09 g/t Au & 106 g/t Ag from 254.00m downhole |
| SNR26-132: | 2.59m grading 13.81 g/t Au & 27 g/t Ag from 273.28m downhole |
Table 1 shows assay results, including drill hole locations and orientations. Reported assay intervals represent downhole intersections, not true widths. True widths can be estimated at approximately 70-80% of the reported intervals.
Figure 1 shows the locations of the drill holes reported in this news release, as well as the other holes completed in 2026, the planned 2026 drill collar locations and the drill collars of pre-2026 drilling of the South Zone.
Figure 2 presents a South Zone cross-section highlighting drill hole SNR26-108, and Figure 3 presents a South Zone cross-section highlighting drill holes SNR26-116 and SNR26-129. The sections are viewed to the northwest (310°) and illustrate strong continuity of mineralization hosted within structurally controlled quartz veins and hydrothermal breccia zones.
Sampling, Laboratory Analyses and Quality Assurance/Quality Control (QA/QC)
Most core samples consist of halved drill core cut by manual sawing using industry standard core saws. In rare cases, and where required by physical core conditions, manual splitting may be used. Half of the core is retained in the original core box for reference samples and any required future work, including QA/QC. Core samples, controlled by a unique bar-coded reference number, are delivered to ALS's Kamloops facility and prepared using the PREP-31 package. Each core sample is crushed to better than 70% passing a 2mm (Tyler 9 mesh, US Std. No.10) screen. A split of 250g is taken and pulverized to better than 85% passing a 75-micron (Tyler 200 mesh, US Std. No. 200) screen.
Further analytical and assay procedures are conducted in ALS's North Vancouver facility. A 0.75g subsample of the pulverized split is subjected to four acid digestion and analyzed via ICP-MS (method code ME-MS61m (+Hg)) which reports a suite of 49 elements.
All samples are also analyzed for gold by fire assay with an AES finish, method code Au-ICP21 (30g sample size) or Au-ICP22 (50g sample size). Samples returning gold values over 10ppm are subjected to over-limit check assays using fire assay and a gravimetric finish (method code Au-GRA21 and a 30g sample size, or Au-GRAV22 and a 50g sample size). The switch to 50g aliquots applies to 2026 resource infill drill holes starting at, and including, SNR26-98. Other over-limit elements may also be subjected to ore grade analyses which vary depending on the element of interest.
ALS's facilities are independent of the Corporation and Westhaven and are accredited to the ISO/IEC 17025 standard for gold assays, and all analytical methods include quality control materials at set frequencies with established data acceptance criteria.
QA/QC incorporates the laboratory's internal quality assurance controls as well as Westhaven's field controls, including the insertion of quarter core duplicates, certified reference materials and blanks, each at a rate of roughly one per 20-25 core samples. Additional blanks are inserted following samples with visible gold or significant concentrations of ginguro (fine grained bands of dark gray to black sulphides).
QA/QC data are evaluated on receipt for failures, and appropriate action is taken if results for duplicates, standards and blanks fall outside allowed tolerances. Westhaven's ongoing QA/QC programs are consistent with industry best practices and include auditing of all exploration data. Any significant changes will be reported when available.
Figure 1 – Plan View Map September 2026
Figure 2 – South Zone Cross Section A-A'
Figure 3 – South Zone Cross Section B-B'
Table 1 – Assay Highlights
ABOUT DUNDEE CORPORATION:
Dundee Corporation is a public Canadian independent mining-focused holding company, listed on the Toronto Stock Exchange (“TSX”) under the symbol“DC.A”. The Corporation is engaged in the identification, evaluation, and advancement of mineral resource opportunities within the mining sector. The Corporation is actively pursuing interests in mining and exploration projects at various stages of development. In connection with these activities, the Corporation conducts technical, geological, and financial due diligence and may enter into joint arrangements, strategic partnerships, and other arrangements with third parties, with its level of involvement in project development and operations varying depending on the nature of the opportunity. The Corporation may support the advancement of mining opportunities through involvement in development planning and oversight of key technical workstreams.
Qualified Person
The scientific and technical information in this news release has been reviewed and approved by Robin Hopkins, P.Geo. (NT/NU), Vice President, Exploration for Westhaven and a Qualified Person for Westhaven under the definitions established by National Instrument 43-101 Standards of Disclosure for Mineral Projects. Mr. Hopkins is independent of Dundee.
FOR FURTHER INFORMATION PLEASE CONTACT:
Investor and Media Relations
T: (416) 864-3584
E: ...
FORWARD-LOOKING STATEMENTS:
This news release contains“forward-looking information” and“forward-looking statements” within the meaning of applicable securities legislation. These forward-looking statements are made as of the date of this news release and Dundee does not intend, and does not assume any obligation, to update these forward-looking statements, except as required by law.
Forward-looking statements in this news release may include, but are not limited to, statements with respect to completing approximately 50,000m of drilling during the year; completing an updated South Zone mineral resource estimate and the planned Pre-Feasibility Study and timing thereof; future planned activities; future mineral production and future growth potential for the Shovelnose project; the interpretation of preliminary results from exploration undertaken to date at the Shovelnose project using various exploration techniques and analysis; statements with respect to potential styles of epithermal mineralization at the Shovelnose project; and, the possibility that the Shovelnose project may host multiple gold bearing epithermal systems.
In certain cases, forward-looking statements can be identified by the use of words such as“plans”,“expects” or“does not expect”,“is expected”,“budget”,“scheduled”,“estimates”,“forecasts”,“intends”,“anticipates” or“does not anticipate”, or“believes”, or variations of such words and phrases or state that certain actions, events or results“may”,“could”,“would”,“might” or“will be taken”,“occur” or“be achieved”. Forward-looking statements are based on the opinions and estimates of management of Dundee as of the date such statements are made, and they are subject to known and unknown risks, uncertainties and other factors that may cause the actual results to be materially different from those expressed or implied by such forward-looking statements or forward-looking information. Assumptions have been made regarding, among other things, the price of gold and other precious metals; costs of exploration and development; the estimated costs of development of the Shovelnose project; Westhaven's ability to operate in a safe and effective manner and its ability to obtain financing on reasonable terms.
Although management of Dundee have attempted to identify important factors that could cause actual results to differ materially from those contained in forward-looking statements or forward-looking information, there may be other factors that cause results not to be as anticipated, estimated or intended. Many factors, both known and unknown, could cause actual results, performance, or achievements to be materially different from the results, performance or achievements that are or may be expressed or implied by such forward-looking statements or forward-looking information. Such factors include, without limitation: precious metals price volatility; regulatory, consent or permitting delays; risks relating to reliance on Westhaven's management team and outside contractors; risks regarding mineral resources and reserves; currency fluctuations; risks regarding the failure to generate sufficient cash flow from operations; risks relating to project financing and equity issuances; risks and unknowns inherent in all mining projects, including the inaccuracy of reserves and resources, metallurgical recoveries and capital and operating costs of such projects; laws and regulations governing the environment, health and safety; operating or technical difficulties in connection with mining or development activities; employee relations, labour unrest or unavailability; Westhaven's interactions with surrounding communities; the speculative nature of exploration and development, including the risks of diminishing quantities or grades of reserves; stock market volatility; conflicts of interest among certain directors and officers; and the factors identified in Dundee's other public disclosure available on SEDAR+ at Mineral exploration involves a high degree of risk and few properties, which are explored, are ultimately developed into producing mines. There can be no assurance that such forward-looking statements or information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements and forward-looking information.
A photo accompanying this announcement is available at

Legal Disclaimer:
MENAFN provides the
information “as is” without warranty of any kind. We do not accept any
responsibility or liability for the accuracy, content, images, videos,
licenses, completeness, legality, or reliability of the information
contained in this article. If you have any complaints or copyright issues
related to this article, kindly contact the provider above.





Comments
No comment