Urbana Corporation Intersects 4.2 G/T Au Over 10 Metres And Begins Second Drill Program
| Drill Hole | From (m) | To (m) | Length (m)1 | Grade (Au g/t) |
| UU-25-01 | 89.20 | 92.65 | 3.45 | 3.27 |
| UU-25-01 | 113.70 | 120.00 | 6.30 | 1.26 |
| UU-25-02 | 110.20 | 114.00 | 3.80 | 0.58 |
| UU-25-03 | No Significant Values | |||
| UU-25-04 | No Significant Values | |||
| UU-25-05 | 213.00 | 215.00 | 2.00 | 1.15 |
| UU-25-05 | 286.75 | 289.75 | 3.00 | 1.01 |
| UU-25-05 | 327.30 | 328.70 | 1.40 | 1.06 |
| UU-25-06 | No Significant Values | |||
| UU-25-07 | No Significant Values | |||
| UU-25-08 | No Significant Values | |||
| UU-25-09 | 258.00 | 261.00 | 3.00 | 0.54 |
| UU-25-10 | 46.50 | 48.00 | 1.50 | 0.97 |
| UU-25-10 | 229.30 | 230.05 | 0.75 | 3.55 |
| UU-25-11 | No Significant Values | |||
| UU-25-12 | 23.00 | 33.00 | 10.00 | 4.23 |
| Including | 28.50 | 30.00 | 1.50 | 23.40 |
| UU-25-12 | 52.00 | 53.50 | 1.50 | 1.44 |
| UU-25-12 | 73.00 | 74.00 | 1.00 | 1.49 |
| UU-25-13 | 18.85 | 19.35 | 0.50 | 6.43 |
| UU-25-13 | 139.50 | 140.00 | 0.50 | 2.60 |
| UU-25-13 | 221.00 | 222.25 | 1.25 | 1.03 |
| UU-25-13 | 243.50 | 247.60 | 4.10 | 0.40 |
| UU-25-14 | 154.20 | 155.20 | 1.00 | 1.10 |
| UU-25-15 | 26.00 | 27.00 | 1.00 | 1.17 |
| UU-25-15 | 192.60 | 195.35 | 1.75 | 0.58 |
| UU-25-16 | No Significant Values | |||
| UU-25-17 | 151.40 | 152.40 | 1.00 | 1.62 |
1 Intervals reported in this news release represent drill lengths. True widths of the mineralized intervals are not known.
QAQC
The Corporation follows industry-standard Quality Assurance and Quality Control (QA/QC) procedures. Diamond drill core (HQ and PQ diameter) was sawn in half, with one-half submitted to ALS Laboratories in Val d'Or, Quebec, a ISO 9001-certified independent analytical laboratory with internationally recognized quality standards.
Gold analyses were completed by fire assay, with copper and silver initially determined by aqua regia digestion and atomic absorption and subsequently updated using four-acid digestion (MS48) multi-element analysis.
Certified reference materials (OREAS 222 and OREAD 240) and blanks were inserted into the sample stream at industry-standard frequencies, including routine insertion of blanks following mineralized intervals. Duplicates where also inserted randomly within the samples. All assay batches have passed QA/QC review and fall within acceptable tolerance limits.
Qualified Persons
This news release has been prepared by Mathieu Stephens, P.Geo, Principal Geological Consultant for Urbana, who is a Qualified Person as defined by National Instrument 43-101 - Standards of Disclosure for Mineral Projects. Mr. Stephens is not independent of the Company.
For further information, contact:
Elizabeth Naumovski
Investor Relations
Urbana Corporation
(416) 595-9106...
The information set forth in this news release includes certain forward-looking statements. Such statements are based on assumptions exposed to major risks and uncertainties. Although Urbana deems the expectations reflected in these forward-looking statements to be reasonable, the Corporation cannot provide any guarantee as to the materialization of the expectations reflected in these forward-looking statements. Urbana expressly disclaims any intention or obligation to update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by applicable law.

Legal Disclaimer:
MENAFN provides the
information “as is” without warranty of any kind. We do not accept
any responsibility or liability for the accuracy, content, images,
videos, licenses, completeness, legality, or reliability of the information
contained in this article. If you have any complaints or copyright
issues related to this article, kindly contact the provider above.

Comments
No comment