How To Set Up A Wireless Network Using Powerline Wi-Fi Kit By Pair Button

10/22/2024 3:07:25 PM

(MENAFN- GetNews) User's Application Scenario:

I have a wireless route in my house, but the wireless signal cannot reach every corner. So I bought a Powerline Wi- Fi Kit to extend the wireless network. The Powerline Wi-Fi Kit includes a powerline adapter and a powerline extender can I do that? Follow the steps below. Note: powerline adapter WD-T1202MH+WD-F1202MH-T is used for demonstration in this article.

Step 1

Connect the powerline adapter to an available LAN port of the host router. Plug the powerline adapter into a wall socket. Plug the powerline extender into a wall socket near the adapter.

Step 2

Pair the powerline devices . a. Press the Pair button of the powerline adapter for 1-3 second. The Power LED starts blinking. Note: If the Power LED does not blink, press it again. b. Within two minutes, press the Pair button of the powerline extender for 1-3 second. The Power LED starts blinking. When the Powerline LED stays on, the pairing process is done!

Step 3

Find the Wi-Fi Info in the back sticker, and then relocate the powerline extender to a new location. Connect to the Wi-Fi using the SSID and password on the card

MENAFN22102024003238003268ID1108807747

Legal Disclaimer:
MENAFN provides the information “as is” without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the provider above.