A wet floor cleaner that doesn’t suck: Introducing the Dyson WashG1, Dyson’s first dedicated wet floor cleaner


(MENAFN- Weber Shandwick) Engineered for hygienic cleaning and maintenance, the Dyson WashG1 tackles wet and dry debris, in one go, for a barefoot clean feel

• Highly absorbent microfibre filament rollers counter-rotate to remove spills, debris and dried on stains, all in one go.
• Dyson’s new separation technology divides wet and dry debris at source, for hygienic disposal and maintenance.
• 1 litre capacity clean water tank, covering flooring up to 290m2.
• Pulse modulated hydration pump precisely controls and adjusts the amount of water delivered to the microfibre rollers, via 26 hydration points.


Dyson unveils its latest floorcare technology, designed to pick-up wet and dry debris in one go to deliver a hygienic clean on hard floors, across large spaces. With a 1 litre clean-water tank to cover flooring up to 290m2, the Dyson WashG1 uses a combination of hydration, absorption, and extraction technologies to remove wet and dry debris in one go – automatically separating it out, so maintenance is more hygienic.


Charlie Park, Vice President of Dyson Home Engineering at Dyson:
“Wet cleaning is considered a necessary chore globally and the perceived burden has been the target of a vast array of wet floor cleaning formats. Despite this, users’ expectations are often left unfulfilled when it comes to stain removal, pick-up performance, and floor finish. Dyson engineers solve the problems others ignore and we thrive on the challenge of creating better technology. The Dyson WashG1 is the result of this; our first dedicated wet machine to wash hard floors, properly and hygienically.”



Highly absorbent, counter-rotating rollers
Two individually powered rollers counter-rotate whilst a pulse-modulated pump distributes water evenly across 26 precisely positioned hydration points, along the full width of each roller.

Each roller is made up of a highly absorbent microfibre, with 64,800 filaments per cm2. This combination of high density microfibre and consistent application of clean water ensures liquid spills are absorbed, whilst dry dirt, debris, and hair is enveloped by the millions of filaments. By positioning two rollers at the front and back of the machine, Dyson engineers also achieved longer dwell time on stains with each pass, for powerful and fast stain removal.


Pioneering separation technology for hygienic maintenance
Dyson’s unique separation technology divides debris and dirty water at source, for hygienic, no-touch disposal. Dirty water is extracted from the rollers by durable extraction plates, whilst secondary nylon-bristled inner brush bars remove dirt and debris from the microfibre rollers, flicking it straight into a removeable debris tray.

The debris tray has been designed with a 500-micron mesh to separate dirty water from the large debris. Powered by an extraction pump, dirty water is immediately collected in a 0.8 litre capacity dirty water tank, without allowing large debris to pass through the machine. Keeping the dirt and debris in the head of the machine, and the dirty water in a separate tank allows for easy and hygienic disposal. To further support ease-of-maintenance for users, the Dyson Wash G1 has been intricately designed without sharp internal surfaces or crevices, to help lessen dirt or grime build up inside the machine. Both water tanks have been designed with large openings to allow for easy maintenance and cleaning.

After use, the self-cleaning mode saturates both rollers with clean water on the highest boost setting, flushing the entire system in preparation for the next clean.


Customised hydration control for an optimum floor finish
The Dyson WashG1 has been designed with in-use hydration control, allowing owners to select the level of hydration required based on debris type, flooring, or personal preference. The low, medium, and high modes each run continuously once selected, to provide increased levels of hydration respectively. Each mode also features an additional three sensitivity settings, to allow owners to fine tune them to their individual cleaning needs. A separate boost mode button purges each roller with the maximum amount of hydration when pressed, for removal of stubborn dirt and dried on stains.

“Stain removal performance is dependent on the correlation of hydration of the floor and agitation applied. We’ve engineered our machine to allow owners full control, enabling them to deep clean their homes effectively.” – Charlie Park, VP of Dyson Home Engineering at Dyson.


Manoeuvrability and edge-to-edge cleaning
The rollers span the full width of the cleaner head to allow for edge-to-edge cleaning, right to the corners. The Dyson WashG1 has been designed with two motors that sit within each microfibre roller, spinning in opposite directions so they clean in both directions.

For optimised manoeuvrability, Dyson engineers fine-tuned each motor to spin at a consistent speed in accordance with the hydration mode selected, allowing the machine to glide effortlessly whilst cleaning is in process. Adopting technology from the Dyson Omni-glide, casters provide additional balance and weight support, whilst the low cleaner head height allows for easy reach underneath furniture.

Buy Direct from the people who made it
The Dyson WashG1™ wet floor cleaner is available from August priced at AED 2,799 Exclusively through Dyson Direct, owners will receive an additional set of rollers with every unit purchased.

To buy, learn more, and experience the Dyson WashG1TM wet floor cleaner, visit local Dyson Demo Stores. For more information, visit

MENAFN24052024004056014353ID1108254174


Weber Shandwick

Legal Disclaimer:
MENAFN provides the information “as is” without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the provider above.