Epazo Toi Installation Guide | How To Install A Chandelier

(MENAFN- Market Press Release) April 7, 2024 5:31 am - Chandeliers come in different designs and sizes, and after choosing an ideal chandelier we still need to think about installation. The height at which a chandelier should be hung and where it should be mounted are important considerations.

Note: Before purchasing, you need to check the weight of the chandelier to make sure that your ceiling can support the weight of the

1 of tools
Epazo Toi comes with the necessary parts for each fixture, but it is also necessary for the customer to prepare the tools (ladder, screwdriver, etc.) needed to install the fixture.

Maybe you need these tools?
1?Ladder
2?Pliers
3?Wire Strippers
4?Screwdrivers
5?Power Drill (optional)
6?Drill Bit (optional)

2 off the power
You should also make sure that the power to your home is turned off before installing the chandelier to avoid any safety issues.?

3. Mounting Bracket
Remove the existing fixture and secure the mounting bracket to the outlet box using the machine screws included in the box.

4. Assemble the chandelier
The chandelier needs to be assembled for installation. Please read our installation instructions for installation or view the assembly video.

5. Determine the length of the chain or pendant bar
All of our chandeliers have adjustable hanging lengths.
The height of the chandelier installation depends on the actual situation, usually the lower bottom of the chandelier is 2.2m-2.5m from the ground is the most appropriate, as long as the walk from below will not touch the head, but the installation or try to be a little bit higher, too low will look very depressing.
You can also choose the right chandelier for your house with our chandelier buying guide.

6. Connect the wires and install
Most chandeliers have a black wire that carries current and a neutral white wire. Connect the black wire to the fire wire and the white wire to the zero wire. Connect the stripped end of the black power cord to the stripped end of the chandelier's black wire and screw them together. Perform the same operation for the white wire and the white power cord.
Installing the light fixture is very simple at this point, just secure the assembled chandelier to the mounting bracket.

7. Install the bulb
Epazo Toi does not supply or sell light bulbs for the fixtures. Customers need to determine which type of bulb is required for the fixture according to the product details before purchasing the bulb themselves.
After installing the bulb, you can turn on the power switch and light switch to check if the fixture is working properly, and if there are no problems, you can enjoy your new chandelier!

MENAFN08042024003520003262ID1108069388